• graphtec fc8600-130 (54″) ask_032906 graphtec fc8600-130 (54″) graphtec 23

Graphtec FC8600-130 (54″)

Product Description Best performing Cutter in its classFC8600 series premiere cutting plotter providing higher productivity and greater ease of useFastest cutting speed in its class1485 mm/s maximum cutting speed for the higher productivity.High..

  • Brand: GRAPHTEC
  • Product Code: ask_032906
  • Availability: In Stock
USD 2,200.00

Product Description


Best performing Cutter in its class

FC8600 series premiere cutting plotter providing higher productivity and greater ease of use

Fastest cutting speed in its class

1485 mm/s maximum cutting speed for the higher productivity.

Highest cutting force in its class

5.88 N (600 gf) maximum cutting force for a wide variety of applications. Expands the range of
possible cutting media such as thick film.

Reliable long-length tracking

Guaranteed 15m tracking and accuracy. 
Includes basket and push rollers with 3 different pressure settings  to provide a more stable media feed and to support a wider range of media. The series includes cutting widths of 61 cm (24 in.) to 162 cm (64 in.).



CPU32-bit CPU
ConfigurationGrit rolling type
Drive methodDigital servo drive
Max. cutting area (W x L) (*1)610 mm x 50 m762 mm x 50 m1067 mm x 50 m1372 mm x 50 m1626 mm x 50 m
Cutting area of guaranteed accuracy(*2)590 mm x 15 m742 mm x 15 m1043 mm x 10 m, 894 mm x 15 m1342 mm x 10 m, 894 mm x 15 m1603 mm x 10 m, 894 mm x 15 m
Mountable media widthMin. 50 mm
Max. 770 mm
Min. 50 mm
Max. 920 mm
Min. 50 mm
Max. 1224 mm
Min. 50 mm
Max. 1529 mm
Min. 50 mm
Max. 1850 mm
Max. cross cut width734 mm886 mm1191 mm1496 mm1750 mm
Number of push rollers2 rollers2 rollers3 rollers3 rollers4 rollers
Max. cutting speed1485 mm/s at 45° direction
Axial accelerationMax. 39.2 m/s2 (4 G) in 8 steps
Cutting forceMax. 5.88 N (600 gf) in 48 steps
Mechanical resolution0.005 mm
Programmable resolutionGP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2)Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2)Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character sizeApprox. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade typesSupersteel (0.9 mm or 1.5 mm diameter)
Pen typesWater-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool typeSteel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3)Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncingRegular paper from 0.06 to 0.13 mm thick
Light pointerBuilt into the tool carriage
Cross-cutterBuilt into the tool carriage
Perforation cuttingSupported (performed by force control)
Registration mark sensing systemScans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interfaceUSB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory2 MB
Command setsGP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settingsDual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
DisplayGraphic type LCD (3-inch, backlight)
Power source100 V to 240 V AC, 50 / 60 Hz
Power consumptionMax. 160 VA
Operating environment10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)Approx. 1128 x 715 x 1219 mmApprox. 1278 x 715 x 1219 mmApprox. 1578 x 715 x 1219 mmApprox. 1878 x 715 x 1219 mmApprox. 2138 x 715 x 1219 mm
WeightApprox. 38 kg
including stand
Approx. 42 kg
including stand
Approx. 46 kg
including stand
Approx. 50 kg
including stand
Approx. 59 kg
including stand
Included software (*4)Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3
Compatible OS (*4)Windows 10 / 8.1 / 8 / 7 / Vista
Mac OS 10.6 to 10.10
Compatible StandardsUL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A


Standard accessories

Power cord1The type of cord is different by destination
Cutting blade holder1PHP33-CB09N-HS
Cutting blade1CB09UB
Fiber-tip pen holder1PHP31-FIBER
Water-based fiber-tip pen1KF700-BK (black ink)
Stand1Parts kit of stand
Media stocker1Set of stock rollers and mounting brackets (Installed on the stand)
BasketPG00391Parts kit for FC8600-60
PG0040Parts kit for FC8600-75
PG0041Parts kit for FC8600-100
PG0042Parts kit for FC8600-130
PG0043Parts kit for FC8600-160
USB cable1Cable for USB2.0, 2.9m long
DVD-ROM1User manual (PDF format), Windows driver, Software (Plotter controller, Graphtec Studio, Cutting Master 3)
Manual2Quick start and safety guide